Gutter Services Glossary for Erie Homeowners

The vertical pipe that carries water from gutters to the ground. Erie homes typically need downspouts every 20-30 feet of gutter run.

The most common gutter mounting method, attaching directly to the fascia board. The fascia must be sound — rot from Erie's moisture is a common issue requiring repair first.

A cover or screen installed over gutters to prevent leaves and debris from clogging the system. Multiple types available including mesh, reverse curve, and foam.

The slight angle gutters are installed at to direct water toward downspouts. Proper slope is about 1/2 inch per 10 feet. Insufficient slope causes standing water.

An L-shaped piece of metal installed under roofing material and over the gutter to ensure water flows into the gutter rather than behind it.

A gutter with a semi-circular profile, common on older and historic Erie homes. More expensive than K-style but appropriate for period-correct restoration.

A ridge of ice at the roof edge that prevents meltwater from draining. Clogged gutters worsen ice dams. Proper attic insulation and ventilation are the real solutions.

The most common gutter profile in Erie, with a flat bottom and decorative front that resembles crown molding. Available in 5-inch and 6-inch widths.

A mesh or perforated cover that fits over gutters to block large debris while allowing water through. The most affordable gutter protection option.

Gutters formed from a continuous piece of aluminum on-site using a portable machine. No joints except at corners means fewer leaks. The standard for new gutter installation in Erie.

A small concrete or plastic trough placed under a downspout to direct water away from the foundation. A basic but important component for Erie homes.

A buried pipe that carries downspout water away from the foundation. Discharges at a lower point in the yard or into a storm drain. Critical for Erie homes with basement moisture issues.